1:24 / 1:32 Slot Car Racing
Ask around and most will say Carrera is one of the top brands when it comes to slot car race sets. One of the many reasons for its popularity is that Carrera uses a wide 1/24 scale track that is able to accommodate both 1/24 and 1/32 scale slot cars. This means that you're not limited solely to one scale, which adds variety and excitement to your race days!
Carrera DIGITAL 124 & DIGITAL 132 offers a lot of innovative features in comparison to a traditional analog slot car track. These include up to 6 cars on the same track, lane changing, autonomous cars, pit stops, timing, scoring and much more. The ideal way to get started in Carrera DIGITAL is to purchase a DIGITAL 124 or DIGITAL 132 race set, which can be expanded with any of the additional features that you desire.
Looking for a more traditional race set experience? Then Carrera can also meet that need with an EVOLUTION race set, which is one car per lane slot car racing and comes with 1/24 scale track and 1/32 slot cars. Analog is great for those who want the versatility of running a lot of different brands of slot cars, both new and old, on a track. In comparison, DIGITAL is limited to only using digital cars. A Carrera EVOLUTION race set will accommodate both 1/24 and 1/32 scale slot cars, and can be converted to DIGITAL at some point if desired. The Carrera EVOLUTION line of slot cars are analog only 1/32 scale slot cars that offer a great value, given the detail and performance.
-
SCX PRO Crown Brake (3) 50540
$4.75Replacement brake pad for immediate stopping or slowing. Fits the SCX PRO GT cars.$4.75 -
SCX PRO Citroen Xsara Rally Chassis 50500
$5.50Rally chassis, ideal for more demanding drivers. Comes with drop arm. Replacement chassis for the PRO Citroen Xsara.$5.50 -
Scalextric Track Extension Pack 6 C8555
MSRP: $49.99$45.95Scalextric Track Extension Packs are a cost saving way to expand your Scalextric 1:32 slot car track! With this Pack 6, you get eight C8204 R3 22.5° curves which are also referenced as letter N on the underside of each track piece. The width of the...MSRP: $49.99$45.95 -
Scalextric Straight Half 175mm (2) C8207
MSRP: $14.99$13.99The Scalextric C8207 track pack comes with two 175mm half straights which is also referenced as letter D on the underside of each track piece. The length of the track is 6.890 inches and the width is 6.125 inches. This straight track is compatible with...MSRP: $14.99$13.99 -
Scalextric Radius 2 45° Curve Track (2) C8206
$21.95The Scalextric C8206 track pack comes with two Radius 2 45° curves which is also referenced as letter C on the underside of each track piece. The width of the track is 6.125 inches. This curve track is compatible with the 2004 and newer style...$21.95 -
Pioneer Front Axle Assembly 119-MSE
$6.50American racing wheels w/ magnesium silver spokes, 3/32 axle size. Fits the Pioneer Camaro and Mustang 1/32 slot cars.$6.50 -
Pioneer 3/32 Bronze Axle Bushings - 2 pack 99-2
$2.50The Pioneer 3/32 Bronze Axle Bushings fit 2.38 mm (3/32) diameter axles including Pioneer, Scalextric and Slot It 1/32 slot cars.$2.50 -
NINCO XLOT Wheels (18.6 x 11.6 mm) - 2 pack 61702
$9.95Replacement rear wheels for the NINCO XLOT 1/28 slot cars. Fits NINCO XLOT 3.00 mm diameter axles and for use with NINCO XLOT 24.2 x 11.6 mm tires. Includes: 2 - aluminum wheels and 2 - set screws.$9.95 -
NINCO XLOT Motor XL1
Now: $16.95Was: $21.95Replacement motor for the NINCO XLOT 1/28 slot cars. The XLOT XL1 motor is rated at 25,750 rpm at 14.8 volts, 290 gcm. Comes with two motor mounting screws and two washers.Now: $16.95Was: $21.95 -
NINCO XLOT Flex Chassis Weights (2) 61807
$10.50Lowers the center of gravity on an XLOT FLEX 1/28 slot car.$10.50 -
NINCO XLOT FLEX BMW M3 Chassis #61808
$21.95Replacement FLEX plastic chassis for the XLOT BMW M3 1/28 slot car.$21.95 -
NINCO XLOT BMW M3 Lexan Interior Tray #61815
$10.99The NINCO XLOT BMW M3 lexan interior tray is lightweight and is used to lower the center of gravity of the 1/28 slot car.$10.99 -
NINCO XLOT Ball Bearings - 2 pack 61404
$11.99XLOT Ball Bearings are a replacement for standard axle bushings and are used to provide minimal axle rotational friction. Fits all 3.00 mm diameter axles including NINCO XLOT 1/28 slot cars.Retail Price: $ 16.98$11.99 -
Ninco XLOT Aluminum Gear Set 30T/7T - Red 61203
$21.95Enhance your slot car performance depending on the racetrack and driving style. The precise, calibrated interior diameter is 3 mm, standard for NINCO XLOT 1/28 slot cars.Retail Price: $ 34.98$21.95 -
NINCO XLOT 65.0 mm Wide Axles (2) 61407
$4.50Axles are suitable for both front and rear and are the perfect fit for the new XLOT wheels and gears. The 3.00 mm diameter solid rod is standard for NINCO XLOT 1/28 slot cars. Replacement axle set for the XLOT Ferrari 430 slot car.Retail Price: $ 6.98$4.50 -
NINCO XLOT 61.0 mm Wide Axles (2) 61401
Now: $3.95Was: $5.99Axles are suitable for both front and rear and are the perfect fit for the new XLOT wheels and gears. The 3.00 mm diameter solid rod is standard for NINCO XLOT 1/28 slot cars. Replacement axle set for the XLOT Porsche 997 slot car. 1 mm = 0.03937 inches.Now: $3.95Was: $5.99 -
NINCO XLOT 53.0 mm Wide Axles (2) 61408
Now: $3.99Was: $5.99Axles are suitable for both front and rear and are the perfect fit for the new XLOT wheels and gears. The 3.00 mm diameter solid rod is standard for NINCO XLOT 1/28 slot cars. Replacement axle set for the XLOT BMW M3 1/28 slot car. 1 mm = 0.03937 inches.Now: $3.99Was: $5.99 -
NINCO XLOT 3.00 mm Axle Collars - 4 pack
$5.95The NINCO XLOT axle collars are used to eliminate the side to side play of an axle assembly. Fits all 3.00 mm diameter axles including NINCO XLOT 1/28 slot cars.$5.95 -
Ninco ProRace Phosphor Bronze Bushings - 4 pack 80421
Now: $5.95Was: $6.99Phosphor bronze bushings allow a precise and smoother fit to the axle thanks to the lower friction and long life of the phosphor bronze alloy. Fits all 2.48 mm diameter axles including Ninco and Artin 1/32 slot cars.Now: $5.95Was: $6.99 -
Ninco ProRace EVO STD Bushings - 4 pack 80424
Now: $5.95Was: $7.50ProRace EVO bushings feature lubrication points, less friction and more speed. The precise, calibrated interior diameter is 2.48 mm (3/32), standard for Ninco 1/32 slot cars.Now: $5.95Was: $7.50