Redcat GEN8 Parts

The Hexfly HX-3225 25KG high torque standard waterproof digital servo is the perfect upgrade for replacing the stock servo that comes in pretty much any 1/10 and 1/8 RTR RC vehicle, such as the Redcat Racing Blackout XTE or Everest Gen7. It will out...

This Hexfly HX-1040 crawler ESC is made by Hobbywing and is specially programmed for crawlers, which guarantees excellent throttle and brake linearity as well as superior control performance. This is the same one that comes stock on the Redcat Racing...

This Mini Hex Socket Wrench covers the 4 most common metric nut sizes that are used in RC cars (4.5mm, 5.0mm, 5.5mm & 7.0mm). Includes: 1 - mini hex socket wrench.

These Redcat Racing 02037 2.5mm e-clips are stock replacement parts for the Lightning, Tornado, Volcano EPX and many other RC vehicles. Includes:  12 - 2.5mm e-clips.

This Redcat Racing 11177 17T brass pinion gear is 0.8 module (32 pitch) and fits a 3.2mm motor shaft. This pinion gear comes stock on the Gen8 Scout II, Wendigo and can be used with other 1/10 RC vehicles that come with a mod 0.8 (32 pitch) spur gear...

When it comes to a brushed motor, just remember the lower the number of turns the faster the motor. The Redcat Racing 17T RC550 Brushed Motor is a great value and comes standard on the Everest Gen7 and Gen8 Scout II RC crawlers Includes:  1 - 17T...

These Redcat Racing 180016S aluminum wheel hexes & pins are replacement parts for the Gen 7, Gen8 V2, Gen8 Axe and Wendigo 1/10 RC vehicles. Includes:  4 - aluminum wheel hexes and 4 - pins. Note: The Redcat Racing 13838 headless machine...

These Redcat Racing 50043 4mm E-Clips are stock replacement parts for the Dukono, Gen7, Gen8 and many other RC vehicles. Includes:  8 - 4mm e-clips.

These Redcat Racing 70127 2.5mm e-clips are stock replacement parts for the Dukono, Gen7, Gen8, Wendigo and many other RC vehicles. Includes:  10 - 2.5mm e-clips.

This R-3E 2.4GHz 2 channel receiver is an inexpensive way to add another RC vehicle to your Redcat Racing RCR-2CE transmitter. This receiver is the same one that comes in the Redcat Racing RTR RC vehicles such as the Blackout, CAMO, Dukono, Gen7, Kaiju,...

Time to replace the ball bearings on your Gen8 1/10 RC crawler? Do it right with a high quality and money saving Fast Eddy sealed ball bearing kit. The included low friction ball bearings are rubber sealed on both sides to keep the dirt out, which means...

This Redcat Racing RER11326 bumper set are stock replacement parts for the Gen8 Scout II 1/10 RC crawler. Includes:  1 - front and 1 - rear bumper.

This Redcat Racing RER11336 transfer case drive shaft set are stock replacement parts for the Gen8 V2 and the Gen8 Axe 1/10 RC crawlers. Includes:  1 - transfer case drive shaft set.

This Redcat Racing RER11338 body post set are stock replacement parts for the Gen8 Scout II 1/10 RC crawler. Includes:  1 - body post mount, 2 - short body posts and 2 - long body posts.

These Redcat Racing RER11343 shocks are stock replacement parts for the Gen8 1/10 RC crawler. The eye to eye length of the shocks is 97.5mm and the outer diameter is 16mm. Includes:  2 - shock absorbers.

This Redcat Racing RER11344 center drive shaft set are stock replacement parts for the Gen8 V2 and the Gen8 Axe 1/10 RC crawlers. Includes:  1 - center drive shaft set. Note: The Redcat Racing 13838 headless machine screws are NOT included.