Model Rocket Parts

Some kits the Estes PNC-80B nose cone is used in - Super Big Bertha, Broadsword, Fat Boy, etc. Fits Estes BT80 (2.600 diameter) body tubes. Great for scratchbuilding and repairs! Specifications: Length: 4.000" Diameter: 2.600" Shape:...

A Firewall Parachute Protector is used instead of recovery wadding in a model rocket and can be used over and over again since it is made from durable, heat resistant fabric. These 3 x 3 inch parachute protectors are for model rockets with up to a 1 inch...

Top Flight Recovery's Thin Mill Nylon Parachutes are a great upgrade replacement for plastic parachutes. They are also a great choice when compact or light weight chutes are required. This 30 inch parachute is generally recommended for model rockets with...

Top Flight Recovery's X-Type parachutes are designed to greatly reduce your rocket's horizontal drift. These parachutes are perfect for high altitude rockets, windy conditions, and when your launch site is limited. Constructed from 1.1 oz thin mill...

This Top Flight Recovery Thin Mill Nylon Streamer is constructed from 1.1 oz thin mill ripstop nylon - produces a very strong, durable and packable streamer. Comes with one looped shroud line sewn from edge to edge for easy attachment. High visibility...

This engine hook is for use with all 1.75 long model rocket engines including the Estes 1/4A, 1/2A, A3 and A10 mini engines. Grid spacing in photo is 1/2.

Choose from different strengths. Most model rocket kits generally use the 1/4 inch wide shock cord. The 1/8 inch wide elastic chock cord is for smaller light weight rockets that weigh between 0.4 to 2.9 ounces. The 3/8 inch wide size is for larger...

This Qualman Rocketry BT56 Ejection Baffle allows you to upgrade a model rocket to be used without needing any recovery wadding! The unique four plate baffle design blocks and traps the burning particles from the ejection charge, preventing them from...

The Qualman Rocketry CR5060 centering rings come in an 8 pack and are used to center a BT50 tube (0.976 diameter) into a BT60 (1.637 diameter) body tube. They are precision laser cut from heavy gauge cardstock. Great for cloning, scratch building and...

This Qualman Rocketry BT55 Model Rocket Divider keeps your parachute, shock cord and wadding near the top of the rocket. Also, includes a built-in Kevlar shock cord mount that is further away from the ejection charge in comparison with connecting the...

This Estes parachute comes preassembled and is ready to use on model rockets that require a 12 inch parachute. Compatible with ASP, Estes, Semroc and other similar type model rockets.Tip - On windy days, go down 2 to 3 inches on the parachute diameter to...

An Estes 18mm engine retainer is used in place of an engine hook and allows you to easily change engines by turning the engine cap. Works great for those rockets that don't have fins that extend beyond the bottom of the body tube which normally wouldn't...

Includes an assortment of twenty six Estes centering rings to fit BT5, BT20, BT50 and BT55 tubes. Perfect for making your own engine mounts!Specifications: Material: Paper Includes: 8 - 5/20 centering rings, 4 - 5/50 centering rings, 8 - 20/50...

This Qualman Rocketry BT70 ejection baffle allows you to upgrade a model rocket to be used without needing any recovery wadding! The unique three chamber baffle design blocks and traps the burning particles from the ejection charge, preventing them from...

This Estes parachute comes preassembled and is ready to use on model rockets that require a 6 inch parachute. Compatible with Custom, Estes, Semroc and other similar type model rockets.Tip - On windy days, go down 2 to 3 inches on the parachute diameter...

This Estes 24mm engine retainer is molded in a heat resistant ABS plastic which allows you to quickly and easily load and unload all Estes 24mm C11, D12 and E12 motors. Works great for those rockets that don't have fins that extend beyond the bottom of...

Choose from different strengths. Most model rocket kits generally use the 1/4 inch wide shock cord. The 1/8 inch wide elastic chock cord is for smaller light weight rockets that weigh between 0.4 to 2.9 ounces. The 3/8 inch wide size is for larger...

The Estes Engine Hook Accessory Pack contains enough engine hooks for one mini engine mount, two standard and D engine mounts and two E engine mounts. Includes:  1 - 1.75" engine hook, 3 - 2.75" engine hooks and 2 - 3.75" engine hooks.

This Qualman Rocketry BT70 Model Rocket Divider keeps your parachute, shock cord and wadding near the top of the rocket. Also, includes a built-in Kevlar shock cord mount that is further away from the ejection charge in comparison with connecting the...

This Qualman Rocketry BT60 model rocket divider keeps your parachute, shock cord and wadding near the top of the rocket. Also, includes a built-in Kevlar shock cord mount that is further away from the ejection charge in comparison with connecting the...