1:24 / 1:32 Slot Car Racing

1:24 / 1:32 Slot Car Racing

Ask around and most will say Carrera is one of the top brands when it comes to slot car race sets. One of the many reasons for its popularity is that Carrera uses a wide 1/24 scale track that is able to accommodate both 1/24 and 1/32 scale slot cars. This means that you're not limited solely to one scale, which adds variety and excitement to your race days!

Carrera DIGITAL 124 & DIGITAL 132 offers a lot of innovative features in comparison to a traditional analog slot car track. These include up to 6 cars on the same track, lane changing, autonomous cars, pit stops, timing, scoring and much more. The ideal way to get started in Carrera DIGITAL is to purchase a DIGITAL 124 or DIGITAL 132 race set, which can be expanded with any of the additional features that you desire.

Looking for a more traditional race set experience? Then Carrera can also meet that need with an EVOLUTION race set, which is one car per lane slot car racing and comes with 1/24 scale track and 1/32 slot cars. Analog is great for those who want the versatility of running a lot of different brands of slot cars, both new and old, on a track. In comparison, DIGITAL is limited to only using digital cars. A Carrera EVOLUTION race set will accommodate both 1/24 and 1/32 scale slot cars, and can be converted to DIGITAL at some point if desired. The Carrera EVOLUTION line of slot cars are analog only 1/32 scale slot cars that offer a great value, given the detail and performance.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Speed Light 10T Long Pinion Gear - 2 pack

    Speed Light 10T Long Pinion Gear - 2 pack

    $4.50
    The Speed Light long pinion gear solves the problem of the motor shaft not being long enough to engage the crown gear on an inline motor configuration 1/32 slot car. As a guide: more pinion gear teeth = more speed, & less pinion gear teeth = better...
    $4.50
    Qty in Cart: 0
    Quantity:
    Price:
    $4.50
    Subtotal:
  • Carrera E200 Motor 89200

    Carrera E200 Motor 89200

    $9.50
    Replacement motor for the Carrera DIGITAL 132 & Evolution 1/32 slot cars (except the Carrera F1, 917K and the KTM slot cars). Comes with the stock 9 tooth pinion gear and the electric motor connector. Includes: 1 - motor.
    $9.50
    Qty in Cart: 0
    Quantity:
    Price:
    $9.50
    Subtotal:
  • Carrera guide keel set 20020366

    Carrera Guide Keel Set

    MSRP: $9.99
    $8.75
    This Carrera guide keel set fits all Carrera Digital 124 and Digital 132 slot cars. Also, fits the 2007 and newer Evolution and the 2006 and newer Exclusiv slot cars. Includes enough guide keels for two cars and brush assemblies for four cars. Made by...
    MSRP: $9.99
    $8.75
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $9.99
    $8.75
    Subtotal:
  • Out of stock
    Tamiya Spray-Work painting stand set 74522

    Tamiya Spray-Work Painting Stand Set

    MSRP: $28.00
    $24.95
    This Tamiya Spray-Work airbrush and spray painting stand set comes with with two easy to use stands. The adjustable body stand is perfect for painting plastic car bodies. The 6.30 inch diameter turntable comes with spring clamps and features holes of...
    MSRP: $28.00
    $24.95
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $28.00
    $24.95
    Subtotal:
  • On Sale
    NINCO ProRace 3.0 mm flat head screwdriver NH91007

    NINCO ProRace 3.0 mm Flat Head Screwdriver

    MSRP: $16.98
    Now: $7.95
    Was: $9.95
    Each NINCO ProRace tool features an anti-slip handle with a moveable head and the tip is changeable. Includes: 1 - 3.0 mm flat head screwdriver.
    MSRP: $16.98
    Now: $7.95
    Was: $9.95
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $16.98
    Now: $7.95
    Was: $9.95
    Subtotal:
  • On Sale
    NINCO ProRace 2.0 mm Phillips screwdriver NH91006

    NINCO ProRace 2.0 mm Phillips Screwdriver

    MSRP: $16.98
    Now: $7.95
    Was: $9.95
    Each NINCO ProRace tool features an anti-slip handle with a moveable head and the tip is changeable. The ideal tool for adjusting, removing and installing the body screws on your 1/32 slot car. Includes: 1 - 2.0 mm phillips screwdriver.
    MSRP: $16.98
    Now: $7.95
    Was: $9.95
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $16.98
    Now: $7.95
    Was: $9.95
    Subtotal:
  • On Sale
    NINCO ProRace 2.0 mm hex driver NH91003

    NINCO ProRace 2.0 mm Hex Driver

    MSRP: $16.98
    Now: $7.95
    Was: $9.95
    Each NINCO ProRace tool features an anti-slip handle with a moveable head and the tip is changeable. Includes: 1 - 2.0 mm hex driver.
    MSRP: $16.98
    Now: $7.95
    Was: $9.95
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $16.98
    Now: $7.95
    Was: $9.95
    Subtotal:
  • Ninco-80916 ProRace M2x2 & M2x3 set screws (12) w/ 0.9 mm Hex L-key

    Ninco 80916 ProRace M2x2 & M2x3 Set Screws (12) w/ 0.9 mm Hex L-Key

    $4.95
    The M2 set screws are used to hold the crown gear and wheels to the rear axle. Fits all Ninco ProRace and Slot It components. Pack comes with 6 - 2 mm long and 6 - 3 mm long set screws.
    $4.95
    Qty in Cart: 0
    Quantity:
    Price:
    $4.95
    Subtotal:
  • Out of stock
    Evergreen .010'', .020'', .040'' thick styrene sheet assortment 9008

    Evergreen .010'', .020'', .040'' Thick Styrene Sheet Assortment - 1 each

    $4.29
    User friendly, economical, and high quality styrene enhances scratch model building techniques. Each sheet measures 12 x 6 inches. Includes: 1 - .010" thick sheet, 1 - .020" thick sheet and 1 - .040" thick sheet.
    $4.29
    Qty in Cart: 0
    Quantity:
    Price:
    $4.29
    Subtotal:
  • Dremel 402 mandrel

    Dremel 402 Mandrel

    MSRP: $3.29
    $2.99
    A shank with a threaded head used primarily to hold and use cut-off wheels. Compatible with the following Dremel accessories: 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541. Includes: 1 - mandrel.
    MSRP: $3.29
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $3.29
    $2.99
    Subtotal:
  • Dremel 1-1/4 inch fiberglass reinforced cut-off wheels - 5 pack 426

    Dremel 426 1-1/4" Fiberglass Reinforced Cut-off Wheels - 5 Pack

    MSRP: $11.25
    $9.99
    Ideal for cutting (slot car axles), grooving and trimming all kinds of metal. May also be used on other materials-including thin wood, plastics and ceramics. Includes: 5 - reinforced cut-off wheels.
    MSRP: $11.25
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $11.25
    $9.99
    Subtotal:
  • Team Slot Lancia Stratos Chassis 54030

    Team Slot Lancia Stratos Chassis 54030

    $6.50
    Direct replacement chassis for the Team Slot Lancia Stratos 1:32 slot cars. This chassis come with a suspension spring built into the guide post hole of the chassis and is compatible with the Team Slot 52002 guide.
    $6.50
    Qty in Cart: 0
    Quantity:
    Price:
    $6.50
    Subtotal:
  • On Sale
    SCX PRO lead wire (50 cm) w/ eyelets 50310

    SCX PRO Lead Wire (50 cm) w/ Eyelets 50310

    Now: $1.95
    Was: $2.99
    Flexible cables with easy to fit eyelets. Each car needs the right length, so wires are sold in centimeters with their respective terminals. Can be used with any 1/32 slot car that uses lead wire.
    Now: $1.95
    Was: $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $1.95
    Was: $2.99
    Subtotal:
  • Out of stock
    Scalextric Track Extension Pack 6 C8555

    Scalextric Track Extension Pack 6 C8555

    MSRP: $49.99
    $45.95
    Scalextric Track Extension Packs are a cost saving way to expand your Scalextric 1:32 slot car track! With this Pack 6, you get eight C8204 R3 22.5° curves which are also referenced as letter N on the underside of each track piece. The width of the...
    MSRP: $49.99
    $45.95
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $49.99
    $45.95
    Subtotal:
  • Out of stock
    Scalextric 175mm half straight track C8207

    Scalextric Straight Half 175mm (2) C8207

    MSRP: $14.99
    $13.99
    The Scalextric C8207 track pack comes with two 175mm half straights which is also referenced as letter D on the underside of each track piece. The length of the track is 6.890 inches and the width is 6.125 inches. This straight track is compatible with...
    MSRP: $14.99
    $13.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $14.99
    $13.99
    Subtotal:
  • Scalextric radius 2 45 degree curve track C8206

    Scalextric Radius 2 45° Curve Track (2) C8206

    $21.95
    The Scalextric C8206 track pack comes with two Radius 2 45° curves which is also referenced as letter C on the underside of each track piece. The width of the track is 6.125 inches. This curve track is compatible with the 2004 and newer style...
    $21.95
    Qty in Cart: 0
    Quantity:
    Price:
    $21.95
    Subtotal:
  • Total: items /

Adding your products to cart