1:24 / 1:32 Slot Car Racing
Ask around and most will say Carrera is one of the top brands when it comes to slot car race sets. One of the many reasons for its popularity is that Carrera uses a wide 1/24 scale track that is able to accommodate both 1/24 and 1/32 scale slot cars. This means that you're not limited solely to one scale, which adds variety and excitement to your race days!
Carrera DIGITAL 124 & DIGITAL 132 offers a lot of innovative features in comparison to a traditional analog slot car track. These include up to 6 cars on the same track, lane changing, autonomous cars, pit stops, timing, scoring and much more. The ideal way to get started in Carrera DIGITAL is to purchase a DIGITAL 124 or DIGITAL 132 race set, which can be expanded with any of the additional features that you desire.
Looking for a more traditional race set experience? Then Carrera can also meet that need with an EVOLUTION race set, which is one car per lane slot car racing and comes with 1/24 scale track and 1/32 slot cars. Analog is great for those who want the versatility of running a lot of different brands of slot cars, both new and old, on a track. In comparison, DIGITAL is limited to only using digital cars. A Carrera EVOLUTION race set will accommodate both 1/24 and 1/32 scale slot cars, and can be converted to DIGITAL at some point if desired. The Carrera EVOLUTION line of slot cars are analog only 1/32 scale slot cars that offer a great value, given the detail and performance.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
NINCO ProRace 2.0 mm Phillips Screwdriver
MSRP: $16.98Now: $7.95Was: $9.95Each NINCO ProRace tool features an anti-slip handle with a moveable head and the tip is changeable. The ideal tool for adjusting, removing and installing the body screws on your 1/32 slot car. Includes: 1 - 2.0 mm phillips screwdriver.MSRP: $16.98Now: $7.95Was: $9.95 -
NINCO ProRace 2.0 mm Hex Driver
MSRP: $16.98Now: $7.95Was: $9.95Each NINCO ProRace tool features an anti-slip handle with a moveable head and the tip is changeable. Includes: 1 - 2.0 mm hex driver.MSRP: $16.98Now: $7.95Was: $9.95 -
Ninco 80916 ProRace M2x3 & M2x3 Set screws (12) w/ 0.9 mm Hex L-Key
$4.95The M2 set screws are used to hold the crown gear and wheels to the rear axle. Fits all Ninco ProRace and Slot It components. Pack comes with 6 - 2 mm long and 6 - 3 mm long set screws.$4.95 -
Ninco 80911 ProRace M2x3 Set screws (10) w/ 0.9 mm Hex L-Key
$6.75The M2 set screws are used to hold the crown gear and wheels to the rear axle. Fits all Ninco ProRace and Slot It components. The length of each set screw is 3 mm.$6.75 -
Evergreen .010'', .020'', .040'' Thick Styrene Sheet Assortment - 1 each
$4.29User friendly, economical, and high quality styrene enhances scratch model building techniques. Each sheet measures 12 x 6 inches. Includes: 1 - .010" thick sheet, 1 - .020" thick sheet and 1 - .040" thick sheet.$4.29 -
Evergreen 7/32" Styrene Tube - 3 pieces
$3.50User friendly, economical, and high quality styrene enhances scratch model building techniques. Specifications: Outside Diameter: 0.219" Inside Diameter: 0.163" Length: 14 inches Includes: 3 - styrene tubes.$3.50 -
Dremel 402 Mandrel
MSRP: $3.29$2.99A shank with a threaded head used primarily to hold and use cut-off wheels. Compatible with the following Dremel accessories: 409, 411, 412, 413, 420, 423, 425, 426, 456, 511, 512, 540 and 541. Includes: 1 - mandrel.MSRP: $3.29$2.99 -
Dremel 426 1-1/4" Fiberglass Reinforced Cut-off Wheels - 5 Pack
MSRP: $11.25$9.99Ideal for cutting (slot car axles), grooving and trimming all kinds of metal. May also be used on other materials-including thin wood, plastics and ceramics. Includes: 5 - reinforced cut-off wheels.MSRP: $11.25$9.99 -
Team Slot R5 Turbo Chassis 54035
$6.50Direct replacement chassis for the Team Slot R5 Copa Turbo, R5 Turbo and the R5 Maxi Turbo 1:32 slot cars.$6.50 -
Team Slot Lancia Stratos Chassis 54030
$6.50Direct replacement chassis for the Team Slot Lancia Stratos 1:32 slot cars. This chassis come with a suspension spring built into the guide post hole of the chassis and is compatible with the Team Slot 52002 guide.$6.50 -
Team Slot Audi Quattro Chassis 54034
$6.50Direct replacement chassis for the Team Slot Audi Quattro GR.4 and the Audi Quattro A2 1:32 slot cars.$6.50 -
SCX PRO Lead Wire (50 cm) w/ Eyelets 50310
Now: $1.95Was: $2.99Flexible cables with easy to fit eyelets. Each car needs the right length, so wires are sold in centimeters with their respective terminals. Can be used with any 1/32 slot car that uses lead wire.Now: $1.95Was: $2.99 -
SCX PRO Crown Brake (3) 50540
$4.75Replacement brake pad for immediate stopping or slowing. Fits the SCX PRO GT cars.$4.75 -
SCX PRO Citroen Xsara Rally Chassis 50500
$5.50Rally chassis, ideal for more demanding drivers. Comes with drop arm. Replacement chassis for the PRO Citroen Xsara.$5.50 -
Scalextric Track Extension Pack 6 C8555
MSRP: $49.99$45.95Scalextric Track Extension Packs are a cost saving way to expand your Scalextric 1:32 slot car track! With this Pack 6, you get eight C8204 R3 22.5° curves which are also referenced as letter N on the underside of each track piece. The width of the...MSRP: $49.99$45.95 -
Scalextric Straight Half 175mm (2) C8207
MSRP: $14.99$13.99The Scalextric C8207 track pack comes with two 175mm half straights which is also referenced as letter D on the underside of each track piece. The length of the track is 6.890 inches and the width is 6.125 inches. This straight track is compatible with...MSRP: $14.99$13.99 -
Scalextric Radius 2 45° Curve Track (2) C8206
$21.95The Scalextric C8206 track pack comes with two Radius 2 45° curves which is also referenced as letter C on the underside of each track piece. The width of the track is 6.125 inches. This curve track is compatible with the 2004 and newer style...$21.95 -
Pioneer Front Axle Assembly 119-MSE
$6.50American racing wheels w/ magnesium silver spokes, 3/32 axle size. Fits the Pioneer Camaro and Mustang 1/32 slot cars.$6.50 -
Pioneer 3/32 Bronze Axle Bushings - 2 pack 99-2
$2.50The Pioneer 3/32 Bronze Axle Bushings fit 2.38 mm (3/32) diameter axles including Pioneer, Scalextric and Slot It 1/32 slot cars.$2.50 -
NINCO XLOT Wheels (18.6 x 11.6 mm) - 2 pack 61702
$9.95Replacement rear wheels for the NINCO XLOT 1/28 slot cars. Fits NINCO XLOT 3.00 mm diameter axles and for use with NINCO XLOT 24.2 x 11.6 mm tires. Includes: 2 - aluminum wheels and 2 - set screws.$9.95