HO Slot Car Racing
The HO slot car racing hobby has been around for over 40 years. Over the years, the design of the cars have improved quite a bit to not only allow better looking cars but also ones that are capable of extreme performance. The current HO slot cars are 1:64 scale which is about the size of a Hot Wheels die cast car.
The premier HO slot car brand is AFX, which offers the best mass produced track system and cars. AFX has the widest selection of track pieces to make a track layout up to 8 lanes wide. It's easy to get started, just pick the AFX race set that best fits your budget and then expand to your heart's content.
Here at BRS Hobbies, orders are shipped ultra fast and you get FREE shipping on orders $89.99 and up!
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Out of stock
Labelle Grease Lube w/ PTFE
MSRP: $10.79$8.75The Labelle #106 grease is enhanced with PTFE, the slickest substance known to man. Expect an immediate increase in performance with 100's of uses including slot cars, model trains, radio control toys, 3D printers, etc. For enclosed gear boxes, put a...MSRP: $10.79$8.75 -
Viper Compact Needle Oiler with Oil
$4.49The Viper Scale Racing (VSR) compact needle oiler is a great addition to any work bench or toolbox. Narrow tip for hard to reach spaces and secure cap. Great for HO slot cars and model train engines. Includes: 1 - compact needle oiler...$4.49 -
Bulldog .024" x .065" ID Brass Rear Axle Spacer
$1.00This Bulldog .016-inch thick rear axle spacer is precision made and feature a smooth surface for reduced friction. The spacer is made to slide onto a .0595" or .0625" diameter axle. For proper gear mesh, install one or more metal spacers on the axle...$1.00 -
Out of stockFree Shipping
Auto World BRE Datsun Champions HO Race Set
MSRP: $169.99$159.95From 1969-72 Peter Brock’s BRE Datsuns became giant killers, slaying prestigious Porches, Alfas and BMWs. Not only were BRE Champions but applying Brock’s design craft to the livery of the BRE Datsuns, the cars became icons of...MSRP: $169.99$159.95 -
Viper PST Silicone Rear Tires .436" Narrow
$3.50The Viper Scale Racing PST .436 silicone tires are designed to be used on the Viper double flange rims, .265" single flange rims and others that accept a rear tire that is .200" in width. A great upgrade for most HO slot cars. These .436" slip-on narrow...$3.50 -
Viper Tyco 440x2 7T Pinion Gear
$2.30This Viper Scale Racing 7T pinion gear is compatible with the Tyco 440x2 HO slot cars. The pinion gear is made to press fit onto a 1.5mm diameter motor shaft.Includes: 1 - 7T pinion gear.$2.30 -
Bulldog AFX Turbo SRT 7T & 23T Gear Set
$2.75This Bulldog HO Racing AFX Turbo SRT 23T crown gear comes standard on the latest version of all Bulldog AFX HO slot car chassis (Turbo, SRT & brass class). These gears also fit the Tomy AFX Turbo and SRT HO slot car chassis. The crown gear is a press...$2.75 -
Auto World 4Gear Silicone Colored Tires (24)
MSRP: $15.95$13.99Dress up your Auto World 4Gear HO slot cars with these silicone colored tires! You get a total of 24 tires in 6 different colors. Includes: 12 - silicone front tires and 12 - silicone rear tires.MSRP: $15.95$13.99 -
Bulldog .016" x .065" ID Brass Rear Axle Spacer
$1.00This Bulldog .016-inch thick rear axle spacer is precision made and feature a smooth surface for reduced friction. The spacer is made to slide onto a .0595" or .0625" diameter axle. For proper gear mesh, install one or more metal spacers on the axle...$1.00 -
BRS Auto World 4Gear Silicone Rear Tires
$2.25These BRS Auto World 4Gear silicone rear tires perform great on any track surface and are a precise fit to the rim. Makes a great spec racing tire since the grip will always be the same between tires which isn't always the case with rubber tires...$2.25 -
BRS A-Dash AFX Mondo Grip Silicone Front Tires
$2.25These BRS A-Dash AFX Mondo Grip silicone front tires are slightly smaller in diameter than the stock tires for more predictable handling. The tires measure .430" in diameter when mounted on the stock A-Dash rear rims (compared to .450" for the stock...$2.25 -
BRS Auto World Super III Low Profile Silicone Rear Tires
$2.25These BRS Auto World Super III low profile silicone rear tires lower the traction magnets closer to the track for even better handling. The tires measure .468" in diameter when mounted on the stock Super III rear rims (compared to .486" for the stock...$2.25 -
BRS Auto World ThunderJet Silicone Rear Tires
$2.25These BRS Auto World ThunderJet silicone rear tires perform great on any track surface and are a precise fit to the rim. Makes a great spec racing tire since the grip will always be the same between tires which isn't always the case with rubber tires...$2.25 -
BRS Auto World ThunderJet Silicone Front Tires
$2.25These BRS Auto World ThunderJet silicone front tires perform great on any track surface and are a precise fit to the rim. The smooth rolling firm compound offers more grip than the stock rubber tires, and the dark grey color makes it easy to distinguish...$2.25 -
Bulldog .062" x 1.2" Rear Axle
$1.75This Bulldog rear axle is .062 inches in diameter which is a precise fit to the Bulldog AFX Turbo rear wheels. This size rear axle is used on some HO slot car chassis including the AFX Turbo and the AFX SRT. This axle (along with a .062" compatible crown...$1.75 -
Bulldog .047" x 1.2" Front Axle
$1.50This Bulldog front axle is .047 inches in diameter which is a precise fit to the Bulldog AFX Turbo front wheels. This size front axle is used on a lot of HO slot car chassis including the AFX Mega-G+, AFX Turbo, Life Like M, Tyco 440x2 and the Viper...$1.50 -
Bulldog .020" x .063" ID Brass Rear Axle Spacer
$1.00This Bulldog .020-inch thick rear axle spacer is precision made and feature a smooth surface for reduced friction. The spacer is made to slide onto a .0595" or .0625" diameter axle. For proper gear mesh, install one or more metal spacers on the axle...$1.00 -
BRS A-Dash AFX Mondo Grip Silicone Rear Tires
$2.25These BRS A-Dash AFX Mondo Grip silicone rear tires are slightly smaller in diameter than the stock tires for more predictable handling. The tires measure .486" in diameter when mounted on the stock A-Dash rear rims (compared to .493" for the stock...$2.25 -
BRS Tyco 440x2 Low Profile Silicone Rear Tires
$2.25These BRS Tyco 440x2 low profile silicone rear tires lower the traction magnets closer to the track for even better handling. The tires measure .454" in diameter when mounted on the stock Tyco 440x2 rear rims (compared to .470" for the stock tires). The...$2.25 -
BRS AFX Turbo Mega-G+ Silicone Rear Tires
$2.25These BRS AFX Mega-G+ silicone rear tires perform great on any track surface and are a precise fit to the rim. Makes a great spec racing tire since the grip will always be the same between tires which isn't always the case with rubber tires. The tires...$2.25