HobbyStar

This HobbyStar MOD1 Gear Set comes with 5 pinion gears (11T thru 15T) and offers a great value considering that it would cost $25 if purchased individually. Now you can easily try different pinions...

This HobbyStar 12 AWG (American Wire Gauge) silicone wire is made to take the high amps of today's brushless motors and high C rated LiPo batteries. It's sold by the foot (you will receive one foot...

If you ever run into a situation where the servo plug doesn't quite reach the servo, then you need this HobbyStar 5 3/4 inch long servo extension. Pro Tip - Plug a servo extension into the receiver...

This HobbyStar aluminum 17mm wheel wrench is an ideal tool for removing and installing the wheels on an RC vehicle that uses 17mm wheel nuts such as the Redcat Racing Kaiju 1/8 RC monster truck...

This high-quality HobbyStar heat-shrink tubing variety pack is great to have on hand to cover all your wiring needs! It includes 3 pieces each of red and black 2mm, 4mm, 5mm and 6mm diameter tubing...

The HobbyStar line of 32 pitch pinion gears come in different teeth count options to get just the right gear ratio for your RC vehicle. Less teeth = better acceleration, and more teeth = higher top...

A compact 3S LiPo that is the same size as a 2S battery! This HobbyStar 3S 11.1V 4200mAh 40C hard case LiPo battery is recommended for radio control vehicles that use a 3S LiPo battery, such as the...

This HobbyStar Pinion Adapter allows you to mount a pinion gear with a 5.0mm bore onto a 3.2mm (1/8") motor shaft. It's good to have at least one of these pinion adapters on hand, even more so if you...

The HobbyStar 60A brushless sensorless ESC is a great option for those who want to either convert a 1/10 RC vehicle to brushles power or need a solid replacment 60A brushless ESC for a 1/10 RTR RC...

These HobbyStar body clips are bent up on the end which makes them much easier to install and remove. The clips are black anodized and are the ideal size for 1/10 RC cars & trucks...

This HobbyStar body reamer is primarily used to create Lexan body mount holes from 0-14mm in diameter in RC car and truck bodies. It's beautifully machined with precise knurling for positive grip,...

This HobbyStar Deans Female T-Plug is ready to use with 5 1/2 inches of 14AWG silicone wire already soldered to the connector.  Includes:  1 - female T-plug with soldered 14AWG silicone...

This HobbyStar Deans male T-Plug to female T-Plug extension wire has 11 3/4 inches of 12AWG silicone wire professionally soldered to the contacts of each plug. Includes:  1 - T-plug extension...

This HobbyStar Deans Male T-Plug is ready to use with 5 1/2 inches of 14AWG silicone wire already soldered to the connector.  Includes:  1 - male T-plug with soldered 14AWG silicone lead...

Say goodbye to that wimpy charge lead that comes with most chargers! This HobbyStar Deans T-plug charge lead hooks up to any charger that has 4mm banana plug inputs, such as the Hexfly PRO-X2 or the...

This HobbyStar Deans T-Plug connector plugs in-between the main battery and the ESC to power an electronic accessory that has a male JST connector such as a cooling fan, LED lights, etc. The adapter...