Kadee

Medium (9/32") Centerset Shank - most popular size, for standard height mounting platforms. The Kadee #5 all metal, self-centering coupler will work anywhere a #28, #58, #148 and a #158 Coupler will...

Short (1/4) Centerset Shank. The Kadee #23 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #23...

Medium (9/32") Centerset Shank - most popular size. The #58 coupler is the same as the #5 coupler except the head coupler is smaller which is more to scale and is patterned after the type 'E couplers...

Short (1/4") Centerset Shank. The Kadee #148 all metal, self-centering coupler has the same shank length as the #23 or #43 coupler which will allow the modeler to remove the existing #23 or #43...

Medium (9/32") Centerset Shank - most popular size and a direct replacement for most plastic Medium Centerset "clone" couplers such as the E-Z Mate. The Kadee #148 all metal, self-centering coupler...

EASY TO ASSEMBLE & USE. A must have tool for gauging mounting height, correct coupler height, trip pin, and permanent uncoupler heights for achieving trouble free coupler performance. Also, has a...

Red insulated fiber washer. Useful as spacers for adjusting car height and in many other applications. 1/4" OD x 1/8" ID x .015" thick. 48 per package.

Gray insulated fiber washer. Useful as spacers for adjusting car height and in many other applications. 1/4" OD x 1/8" ID x .010" thick. 48 per package.

Styrene Draft Gear Box Shims for #4, #5, #9, 20-Series, 40-Series and #58 HO couplers used with #5 gear boxes. These shims can also be used with most standard draft gear boxes by cutting off the side...

The Kadee #230 Talgo-Truck Adaptor Insertion Pic is used to insert 20-Series Coupler Talgo Adaptors into coupler pockets.

This fine, dry graphite lubricant is specially selected for use with Kadee couplers. Add a puff inside your couplers, move them back-and-forth a few times to burnish and enjoy smooth action of your...

The Kadee HO #232 Draft Gear Boxes & Lids are for use with the #5, 20-Series, 40-Series, #58, #118 & WHISKER HO couplers.

There are many modelers that wish to manual uncouple with a small tool and Kadee® offers the #241 "Dual Tool" manual uncoupler and spring pick combination. For manual uncoupling the #118 &...

The Kadee #256 2-56 x 1/2 Nylon insulating screws are ideal for mounting couplers. 12 per package.

Under the track hidden installation using a permanent magnet and steel intensifier plate. Suitable for a variety of scales from HO to O-Scale. Delayed magnetic uncoupling is a unique way of dropping...

Place this handy delayed-action uncoupler anywhere on a straight track segment between-the-rails of any code 100 HO scale track such as Bachmann E-Z Track. Delayed magnetic uncoupling is a unique way...