HO Couplers & Wheels

These Bachmann 33 inch diameter flat back wheel sets are a great upgrade for replacing those plastic wheel sets that come on most less expensive HO scale rolling stock. Features - smooth rolling, blackened metal, needle point bearings, NMRA RP25...

Center Shank - Medium (most popular size)The Bachmann HO scale E-Z Mate Mark II magnetic knuckle couplers with metal coil springs fit most HO scale locomotives and rolling stock draft gear boxes (coupler pockets). These couplers are used on the Bachman...

Replace one truck/coupler on your Bachmann freight car with this Flashing LED End of Train Device to finish the end of your freight train. Tracking powered; no wiring required. Operates on both DC and DCC layouts. It installs on the following Bachmann HO...

The Bachmann HO scale E-Z Magnet is used to activate coupling and uncoupling of E-Z Mate couplers. The included magnet is placed under the middle section of a piece of E-Z Track and the trackside brakeman figure is used to indicate the magnet's position...

Medium (9/32") Centerset Shank - most popular size, for standard height mounting platforms. The Kadee #5 all metal, self-centering coupler will work anywhere a #28, #58, #148 and a #158 Coupler will work. The #5 coupler is a direct replacement for most...

Short (1/4) Centerset Shank. The Kadee #23 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #23 Coupler easily installs in existing Talgo-mounted draft...

Long (25/64) Centerset Shank - coupler for standard height mounting platforms. The Kadee #26 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #26...

Medium (9/32) Underset Shank - coupler for low mounting platforms. The Kadee #27 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #27 Coupler easily...

Medium (9/32") Centerset Shank - most popular size. The #58 coupler is the same as the #5 coupler except the head coupler is smaller which is more to scale and is patterned after the type 'E couplers. The Kadee #58 all metal, self-centering coupler will...

Short (1/4") Centerset Shank. The Kadee #148 all metal, self-centering coupler has the same shank length as the #23 or #43 coupler which will allow the modeler to remove the existing #23 or #43 coupler and replace it with this new smaller Scale coupler...

Medium (9/32") Centerset Shank - most popular size and a direct replacement for most plastic Medium Centerset "clone" couplers such as the E-Z Mate. The Kadee #148 all metal, self-centering coupler will fit anywhere a #5 Coupler will work. The #148...

The Kadee HO #205 All Metal Multi-Purpose Coupler Height Gauge is EASY TO ASSEMBLE & USE. A must have tool for gauging correct coupler height, trip pin, and permanent magnet uncoupler heights for achieving trouble free coupler performance. Also, has a...

EASY TO ASSEMBLE & USE. A must have tool for gauging mounting height, correct coupler height, trip pin, and permanent uncoupler heights for achieving trouble free coupler performance. Also, has a built in HO track gauge. Includes a #148 Whisker...

Red insulated fiber washer. Useful as spacers for adjusting car height and in many other applications. 1/4" OD x 1/8" ID x .015" thick. 48 per package.

Gray insulated fiber washer. Useful as spacers for adjusting car height and in many other applications. 1/4 OD x 1/8 ID x .010 thick. 48 per package.

Styrene Draft Gear Box Shims for #4, #5, #9, 20-Series, 40-Series and #58 HO couplers used with #5 gear boxes. These shims can also be used with most standard draft gear boxes by cutting off the side mounting lugs and filing the center hole larger (if...

The Kadee #230 Talgo-Truck Adaptor Insertion Pic is used to insert 20-Series Coupler Talgo Adaptors into coupler pockets.

This fine, dry graphite lubricant is specially selected for use with Kadee couplers. Add a puff inside your couplers, move them back-and-forth a few times to burnish and enjoy smooth action of your couplers. Also, an excellent general purpose lubricant...

The Kadee HO #232 Draft Gear Boxes & Lids are for use with the #5, 20-Series, 40-Series, #58, #118 & WHISKER HO couplers.

For HO, HOn3, S, On3 & O scale couplers. Adjust trip pins to the correct height by gently squeezing with these specially designed pliers. The pliers have jaw surfaces that are curved and smooth. Adjusting the height of your coupler trip pins is...