Model Rocket Parts

This Estes parachute comes preassembled and is ready to use on model rockets that require a 24 inch parachute. Compatible with ASP, Estes, Semroc and other similar type model rockets.Tip - On windy days, go down 2 to 3 inches on the parachute diameter to...

This Estes parachute comes preassembled and is ready to use on model rockets that require a 9 inch parachute. Compatible with ASP, Estes, Semroc and other similar type model rockets.Tip - On windy days, go down 2 to 3 inches on the parachute diameter to...

This Estes 24mm engine retainer is molded in a heat resistant ABS plastic which allows you to quickly and easily load and unload all Estes 24mm C11, D12 and E12 motors. Works great for those rockets that don't have fins that extend beyond the bottom of...

Choose from different strengths. Most model rocket kits generally use the 1/4 inch wide shock cord. The 1/8 inch wide elastic chock cord is for smaller light weight rockets that weigh between 0.4 to 2.9 ounces. The 3/8 inch wide size is for larger...

The Estes Engine Hook Accessory Pack contains enough engine hooks for one mini engine mount, two standard and D engine mounts and two E engine mounts. Includes:  1 - 1.75" engine hook, 3 - 2.75" engine hooks and 2 - 3.75" engine hooks.

This Qualman Rocketry 29mm Model Rocket Divider keeps your parachute, shock cord and wadding near the top of the rocket. Also, includes a built-in Kevlar shock cord mount that is further away from the ejection charge in comparison with connecting the...

This Qualman Rocketry BT70 ejection baffle allows you to upgrade a model rocket to be used without needing any recovery wadding! The unique three chamber baffle design blocks and traps the burning particles from the ejection charge, preventing them from...

This Sunward BT80 Ejection Baffle Kit allows you to upgrade a model rocket such that no recovery wadding is needed! The unique baffle design blocks and traps the burning particles from an ejection charge, preventing them from coming into contact with...

Allows you to convert almost any BT80 based model rocket to 3 x 18mm cluster flights!Laser cut lite ply centering rings and motor hooks for each tube.

Top Flight Recovery's X-Type parachutes are designed to greatly reduce your rocket's horizontal drift. These parachutes are perfect for high altitude rockets, windy conditions, and when your launch site is limited. Constructed from 1.1 oz thin mill...

For use in all model rockets that require a 1/8 launch rod. Custom made to strict standards. Direct replacement for Custom, Estes, FlisKits and other similarly sized model rockets.

The Qualman Rocketry CR5560 centering rings come in an 8 pack and are used to center a BT55 tube (1.325 diameter) into a BT60 body tube. They are precision laser cut from heavy gauge cardstock. You can also double up them for extra strength. Great for...

A quick and easy way to cut body tubes! Includes guides for cutting BT5, BT20, BT50, BT55 and BT60 body tubes.Includes:  5 - different size body tube cutting guides and instructions. Note:  Hobby knife and body tube not included.

This Estes parachute comes preassembled and is ready to use on model rockets that require a 15 inch parachute. Compatible with ASP, Estes, Semroc and other similar type model rockets.Tip - On windy days, go down 2 to 3 inches on the parachute diameter to...

This Estes parachute comes preassembled and is ready to use on model rockets that require a 12 inch parachute. Compatible with ASP, Estes, Semroc and other similar type model rockets.Tip - On windy days, go down 2 to 3 inches on the parachute diameter to...

This Custom BT55 body tube has an almost seamless, mylar coating that accepts enamel and lacquer paint. Direct replacement for Custom, Estes and other similarly sized model rockets. Specifications: Inside Diameter: 1.283" Outside Diameter: 1...