Model Rocket Parts

This Sunward BT50 Ejection Baffle Kit allows you to upgrade a model rocket such that no recovery wadding is needed! The unique baffle design blocks and traps the burning particles from an ejection charge, preventing them from coming into contact with...

The Sunward 24 mm x 2.75 Engine Tube is used to hold Estes C11 and D model rocket engines. Same size as Estes BT50 (0.976 diameter) body tube. Estes quality part - cheaper price! Great for cloning, scratchbuilding and repairs.

This Estes parachute comes preassembled and is ready to use on model rockets that require an 18 inch diameter parachute. Compatible with all ASP, Estes, FlisKits and similar type model rockets! Tip - On windy days, go down 2 to 3 inches on the parachute...

This is a monster-size plastic parachute with a high visibility pattern! At 32 inches across the flat edges, this is the largest printed plastic parachute ever made. Because it was designed for larger rockets, it has two extra suspension lines so it can...

This BT55 body tube has an almost seamless, mylar coating that accepts enamel and lacquer paint. Direct replacement for Custom, Estes and other similarly sized model rockets. Specifications: Inside Diameter: 1.283" Outside Diameter: 1.325" Length:...

Includes an assortment of six Estes tube couplers to fit BT5, BT20 and BT50 body tubes. Perfect for connecting 2 body tubes of the same size together!Retail Price: $ 4.00

This Qualman Rocketry MPC 35mm ejection baffle allows you to upgrade a model rocket to be used without needing any recovery wadding! The unique four plate baffle design blocks and traps the burning particles from the ejection charge, preventing them from...

The Qualman Rocketry BT60C x .125 Lite Ply Bulkhead is used for adding a payload section to a model rocket. The bulkhead is sized to fit inside Sunward BT60 tube couplers. Comes with four bulkhead plates and four smaller backer plates. Coupler sold ...

The Qualman Rocketry BT55C x .125 Lite Ply Bulkhead is used for adding a payload section to a model rocket. The bulkhead is sized to fit inside Sunward BT55 tube couplers. Comes with four bulkhead plates and four smaller backer plates. Coupler sold ...

This Sunward BT56 Ejection Baffle Kit allows you to upgrade a model rocket such that no recovery wadding is needed! The unique baffle design blocks and traps the burning particles from an ejection charge, preventing them from coming into contact with...

The Sunward 50/29mm centering rings are used to center a BT50 tube into a 29mm tube. Also, used as a standard engine block in 29 mm engine tubes. Comes in a 5 pack. Great for cloning, scratchbuilding and repairs!

Allows you to convert almost any BT80 based model rocket to 4 x 18mm cluster flights!Laser cut lite ply centering rings and motor hooks for each tube.

Allows you to convert almost any BT70 based model rocket to 3 x 18mm cluster flights! Laser cut lite ply centering rings and motor hooks for each tube. Accepts 3 - Estes 18mm A, B and C size model rocket engines. Fits in any BT70 size body tube. High ...

This Top Flight Recovery Thin Mill Nylon Streamer is constructed from 1.1 oz thin mill ripstop nylon - produces a very strong, durable and packable streamer. Comes with one looped shroud line sewn from edge to edge for easy attachment. High visibility...

Plastic injection-molded nose cone to fit BT-20 size model rocket body tubes. Plastic cement required to join top and bottom piece. Actual color of the nose cone may vary from photo.

The Estes Sci-fi Nose Cone Assortment includes 2 sci-fi nose cones for BT50 (0.976 diameter) body tubes and 3 sci-fi nose cones that fit BT55 (1.325 diameter) body tubes. Please see the product picture for the included plastic nose cone sizes and styles...