Qualman Rocketry Fin Alignment Guides for Quest rockets
One of the most challenging aspects of building precise model rockets is to get the fins aligned correctly. The fin alignment guides from Qualman Rocketry solve this problem by precisely holding the fins against the body tube as the glue dries. These laser cut guides are sized for 3/32 and 1/8 thick fins and can hold up to 12 fins at once. Includes guides for QT15, QT20, QT25, QT30, QT35, QT40 & QT50 body tubes along with a tube marking guide and a T-mount guide.
The fin alignment guide are marked for easy placement of 1, 2, 3, 4, 6 or 12 fins. Each marking point on the guide has a small indent, giving positive contact with your pencil to get very, accurately, placed marks on your body tubes. Special features include color coded ring for easy identification and outer slots for special fin guide needs.
These fin alignment guides for 3/32 and 1/8 inch thick fins are compatible with many different Quest model rocket kits including the America, Novia and Superbird.
- Fin guide slot width: 3/32" (QT15 thru QT50) & 1/8" (QT35 thru QT50)
- Fin guides for body tube sizes: QT15 (15mm), QT20 (20mm), QT25 (25mm), QT30 (30mm), QT35 (35mm), QT40 (40mm), QT50 (50mm)
- Material: Laser-cut rigid cardstock
Includes: 7 - 3/32 inch fin alignment guides, 3 - 1/8 inch fin alignment guides, 1 - T-mount guide, 1 - tube marking guide and instructions.
Note: The tube marking guide requires assembly with glue.