HO Model Trains

Medium (9/32") Centerset Shank - most popular size. The #58 coupler is the same as the #5 coupler except the head coupler is smaller which is more to scale and is patterned after the type 'E couplers. The Kadee #58 all metal, self-centering coupler will...

Medium (9/32) Underset Shank - coupler for low mounting platforms. The Kadee #27 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #27 Coupler easily...

Long (25/64) Centerset Shank - coupler for standard height mounting platforms. The Kadee #26 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #26...

Short (1/4) Centerset Shank. The Kadee #23 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #23 Coupler easily installs in existing Talgo-mounted draft...

Medium (9/32") Centerset Shank - most popular size, for standard height mounting platforms. The Kadee #5 all metal, self-centering coupler will work anywhere a #28, #58, #148 and a #158 Coupler will work. The #5 coupler is a direct replacement for most...

Du-Bro's double sided tape assortment comes in 3 different thicknesses: 1/32" (0.7mm), 1/16" (1.5mm), 1/8" (3mm). Each size is diecut into four 1" (25mm) x 3" (76mm) pieces. Works great for mounting decoders, servos, receivers, speed controls, etc...

Plug N’ Play sound module for Digitrax DH165 series decoders - DH165A0, DH165K0, DH165K1A, DH165L0 and DH165Q1. Preloaded with selectable Steam and Diesel sound schemes. Factory 28mm round 32 ohm speaker. Smart Power Management-no more booster or...

DCC Decoder Wire for decoder, lighting & signal installation. Includes: 10 foot lengths of 9 different NMRA colors of 30AWG stranded wire.

Ideal size for insulating decoder wire solder joints. Heat shrink tubing insulates and protects wire connections quickly and easily. Shrinks to half the listed diameter when heated with a match, soldering iron or heat gun. 6 inch lengths.

Assembly and breakdown of trains in the railway yard is tough work, but this Bachmann 0-6-0 steam switcher is ready to get the job done. Assemble your consist, clear the yard and move your freight to its final destination with the Pacific...

Precision engineered metal Knuckle Spring for Kadee #58, #78, #119, 150-Series, #178 & #2100 Scale delayed action HO couplers. One dozen per package.

The Brightboy track cleaner is ideal for cleaning the metal rails on a model train or an HO scale slot car track. Also, works great for cleaning HO slot car pick up shoes. The Brightboy is made with natural rubber, selected reinforcing agents and first...

Thomas' eyes move side to side while the engine is in motion! Thomas the Tank Engine performs best on 15 inch radius curves or greater. This Bachmann locomotive is for use on a DC powered HO scale (1:87) train track. Includes: 1 - HO scale Thomas the...

This is the basic turnout of the Bachmann HO scale E-Z Track system with a turnout radius matching the 18 inch radius curved E-Z Track. Features - compatible with all HO gauge locomotives & rolling stock, code 100 steel alloy rails with attached...

This is the basic turnout of the Bachmann HO scale E-Z Track system with a turnout radius matching the 18 inch radius curved E-Z Track. Features - compatible with all HO gauge locomotives & rolling stock, code 100 steel alloy rails with attached...

Replacement rail joiners for Bachmann E-Z Track. Includes: 36 - HO scale rail joiners. Note: Recommended for ages 14 and up.

The Bachmann HO scale E-Z Track 8-piece tall pier set is used for elevating longer track spans at a constant height. Compatible with steel alloy and nickel silver HO scale E-Z Track. Features - vertical clearance under tallest pier is 3 1/8", pivoting...

The Bachmann HO scale E-Z Track 14-Piece graduated pier set is used to create an over/under figure 8 layout or similar configuration. Compatible with steel alloy and nickel silver E-Z Track. Features - vertical clearance under tallest pier is 3 1/8",...

The Bachmann HO scale E-Z Magnet is used to activate coupling and uncoupling of E-Z Mate couplers. The included magnet is placed under the middle section of a piece of E-Z Track and the trackside brakeman figure is used to indicate the magnet's position...

This Bachmann 10' Remote Switch Extension Wire is used to make plug-in connections from your Bachmann switch controller to an E-Z Track switch (track turnout). Can be plugged in a series with additional 10' wires to make longer connections which...