HO Model Trains

Use this Woodland Scenics Tidy Track clean track solution with the Tidy Track cleaning & finishing pads. It is specially formulated to remediate oil and remove dirt and grime for improved conductivity. The clean track solution is non-toxic, water...

Replacement Pads for the Woodland Scenics Tidy Track rail tracker cleaning kit. Use with clean track solution to remove dirt and make track ready for operation. Includes eight cleaning pads and eight finishing pads per package. Works for N, HO and...

The Atlas HO Straight Track Assortment features code 83 nickel silver rail and six pairs of short straight track in varying lengths with rail joiners. Can connect to Kato UNITRACK HO track easily by removing the UniJoiner from the ends of the UNITRACK...

This Kato UNITRACK HO HM1 set creates a basic oval made up of 26 3/8" radius curves and includes the new Kato power pack SX and a rerailer for a track set that is ready to go out-of-the-box; just add an HO scale locomotive and some train cars! Kato HO...

Item #5240106This full featured, 5 function, NCE DA-SR HO DCC decoder is designed to fit the Atlas GP38, GP40, RS1/2/3, C424/5, GP7, RSD4/5/12, C30-7, U23B, U33/36C, Athearn Genesis series locomotives, F7, F3, SD70, SD75, SD80, Kato GP35, SD40, C44-9W...

The auto clamping design of these tweezers make holding small parts effortless. Ideal for assembly couplers and gearboxes. The notch end of the tweezers fits nicely over trip pin to hold coupler parts together. Includes: 1 - coupler & special...

Red insulated fiber washer. Useful as spacers for adjusting car height and in many other applications. 1/4" OD x 1/8" ID x .015" thick. 48 per package.

Short (1/4") Centerset Shank. The Kadee #148 all metal, self-centering coupler has the same shank length as the #23 or #43 coupler which will allow the modeler to remove the existing #23 or #43 coupler and replace it with this new smaller Scale coupler...

Medium (9/32) Underset Shank - coupler for low mounting platforms. The Kadee #27 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #27 Coupler easily...

This Bachmann 10' Power Extension Wire is used to make plug-in connections from your existing Bachmann power pack terminal wire to an E-Z Track Terminal Rerailer or switch controller. Can be plugged in a series with additional 10' wires to make longer...

An entire DCC system in the palm of your hand. This NCE Power Cab 2 Amp DCC starter set can operate up to 4 HO locomotives or 8 N scale locomotives running at the same time. Provides all of the capability and ease of use that you’ve heard about in...

The Northeast Steel Caboose was a standard American style caboose. The most common form was a small windowed projection on the roof, called the cupola. The crew sat in elevated seats to inspect the train from this perch while the train was moving. The...

DCC READYThis Bachmann HO EMD GP40 Conrail diesel locomotive is not only smooth running but looks the part with plenty of detail and has an operating headlight. It even comes DCC ready with a factory-installed 8-pin plug for an easy DCC decoder...

The Woodland Scenics Just Plug tidy wire kit is for keeping model train wiring secure and tidy. The kit even comes with wire tie labels to easily identify the different electrical wiring connections. Adhesive-backed mounts secure cables Wire ties...

The Bachmann 30 degree crossing HO scale E-Z track has many useful applications in railroad design, including being the centerpiece of a basic Figure 8 track configuration. To make a Figure 8, you also need 21 pieces of 18” radius curved track and...

Simple, affordable, straightforward – the track plans in Starter Track Plans for Model Railroaders have one thing in common – they’re eminently buildable. Perfect for small spaces and beginner layouts, this mix of HO and N scale track...

The New Rail Models Universal Throttle Packet 2 will add a nice touch to your layout. The custom-made pockets are made to hold your Atlas, CVP EasyDCC, Digitrax, Lenz, MRC or NCE DCC handheld throttles. The pockets is injection molded from durable ABS...

These Atlas spade connectors are a handy, small electrical hookup connector designed for tight spaces and work great with the Miller Engineering power distribution board. For #18-24 gauge wire and a #3 screw post. The maximum width is .218 and the inside...

The Kadee #256 2-56 x 1/2 Nylon insulating screws are ideal for mounting couplers. 12 per package.

Gray insulated fiber washer. Useful as spacers for adjusting car height and in many other applications. 1/4" OD x 1/8" ID x .010" thick. 48 per package.