HO Model Trains

This MRC 16x35mm rectangle 8-Ohm speaker comes with a baffle and wire harness. Plug and play with all MRC DCC sound decoders that include a speaker socket. Speaker dimensions: 0.630" x 1.378" or 16mm x 35mm. Specs: 1 Watt, 8 ohms. Includes:  1 -...

This MRC 28mm round 8-Ohm speaker comes with a baffle and wire harness. Plug and play with all MRC DCC sound decoders that include a speaker socket. Dimensions: 1.102" or 28mm diameter. Includes:  1 - 28mm round speaker. Note:  Recommended...

The Miller Engineerings Power Distribution Board is ideal for powering up to 10 Miller Engineering animated signs with one power source. The Miller Engineering 4804 AC/DC Converter easily hooks up to the red & black thumb screw terminals or you can...

The auto clamping design of these tweezers make holding small parts effortless. Ideal for assembly couplers and gearboxes. The notch end of the tweezers fits nicely over trip pin to hold coupler parts together. Includes: 1 - coupler & special...

Under the track hidden installation using a permanent magnet and steel intensifier plate. Suitable for a variety of scales from HO to O-Scale. Delayed magnetic uncoupling is a unique way of dropping a car, or cars, at any number of locations, using only...

The Kadee #256 2-56 x 1/2 Nylon insulating screws are ideal for mounting couplers. 12 per package.

The Kadee HO #246 2-56 Tap & Drill Set is used to create the threads for installing 2-56 screws to mount couplers and trucks on HO scale rolling stock.

There are many modelers that wish to manual uncouple with a small tool and Kadee® offers the #241 "Dual Tool" manual uncoupler and spring pick combination. For manual uncoupling the #118 & #119 shelf coupler the #241 has a "pointed" end to fit...

For HO, HOn3, S, On3 & O scale couplers. Adjust trip pins to the correct height by gently squeezing with these specially designed pliers. The pliers have jaw surfaces that are curved and smooth. Adjusting the height of your coupler trip pins is...

The Kadee HO #232 Draft Gear Boxes & Lids are for use with the #5, 20-Series, 40-Series, #58, #118 & WHISKER HO couplers.

This fine, dry graphite lubricant is specially selected for use with Kadee couplers. Add a puff inside your couplers, move them back-and-forth a few times to burnish and enjoy smooth action of your couplers. Also, an excellent general purpose lubricant...

The Kadee #230 Talgo-Truck Adaptor Insertion Pic is used to insert 20-Series Coupler Talgo Adaptors into coupler pockets.

Styrene Draft Gear Box Shims for #4, #5, #9, 20-Series, 40-Series and #58 HO couplers used with #5 gear boxes. These shims can also be used with most standard draft gear boxes by cutting off the side mounting lugs and filing the center hole larger (if...

Gray insulated fiber washer. Useful as spacers for adjusting car height and in many other applications. 1/4 OD x 1/8 ID x .010 thick. 48 per package.

Red insulated fiber washer. Useful as spacers for adjusting car height and in many other applications. 1/4" OD x 1/8" ID x .015" thick. 48 per package.

EASY TO ASSEMBLE & USE. A must have tool for gauging mounting height, correct coupler height, trip pin, and permanent uncoupler heights for achieving trouble free coupler performance. Also, has a built in HO track gauge. Includes a #148 Whisker...

The Kadee HO #205 All Metal Multi-Purpose Coupler Height Gauge is EASY TO ASSEMBLE & USE. A must have tool for gauging correct coupler height, trip pin, and permanent magnet uncoupler heights for achieving trouble free coupler performance. Also, has a...

Short (1/4) Centerset Shank. The #153 coupler is the same as the #143 coupler except the head coupler is smaller which is more to scale and is patterned after the type 'E couplers. The coupler has the same shank length as the #23 or #43 coupler which...

Medium (9/32") Centerset Shank - most popular size and a direct replacement for most plastic Medium Centerset "clone" couplers such as the E-Z Mate. The Kadee #148 all metal, self-centering coupler will fit anywhere a #5 Coupler will work. The #148...

Short (1/4") Centerset Shank. The Kadee #148 all metal, self-centering coupler has the same shank length as the #23 or #43 coupler which will allow the modeler to remove the existing #23 or #43 coupler and replace it with this new smaller Scale coupler...