HO Model Trains

Red insulated fiber washer. Useful as spacers for adjusting car height and in many other applications. 1/4" OD x 1/8" ID x .015" thick. 48 per package.

EASY TO ASSEMBLE & USE. A must have tool for gauging mounting height, correct coupler height, trip pin, and permanent uncoupler heights for achieving trouble free coupler performance. Also, has a built in HO track gauge. Includes a #148 Whisker...

The Kadee HO #205 All Metal Multi-Purpose Coupler Height Gauge is EASY TO ASSEMBLE & USE. A must have tool for gauging correct coupler height, trip pin, and permanent magnet uncoupler heights for achieving trouble free coupler performance. Also, has a...

Medium (9/32") Centerset Shank - most popular size and a direct replacement for most plastic Medium Centerset "clone" couplers such as the E-Z Mate. The Kadee #148 all metal, self-centering coupler will fit anywhere a #5 Coupler will work. The #148...

Short (1/4") Centerset Shank. The Kadee #148 all metal, self-centering coupler has the same shank length as the #23 or #43 coupler which will allow the modeler to remove the existing #23 or #43 coupler and replace it with this new smaller Scale coupler...

Medium (9/32") Centerset Shank - most popular size. The #58 coupler is the same as the #5 coupler except the head coupler is smaller which is more to scale and is patterned after the type 'E couplers. The Kadee #58 all metal, self-centering coupler will...

Medium (9/32) Underset Shank - coupler for low mounting platforms. The Kadee #27 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #27 Coupler easily...

Long (25/64) Centerset Shank - coupler for standard height mounting platforms. The Kadee #26 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #26...

Short (1/4) Centerset Shank. The Kadee #23 insulated, self-centering coupler has a very strong plastic shank to insulate the coupler from the car, the knuckle and trip pin are made of metal. The #23 Coupler easily installs in existing Talgo-mounted draft...

Medium (9/32") Centerset Shank - most popular size, for standard height mounting platforms. The Kadee #5 all metal, self-centering coupler will work anywhere a #28, #58, #148 and a #158 Coupler will work. The #5 coupler is a direct replacement for most...

Du-Bro's double sided tape assortment comes in 3 different thicknesses: 1/32" (0.7mm), 1/16" (1.5mm), 1/8" (3mm). Each size is diecut into four 1" (25mm) x 3" (76mm) pieces. Works great for mounting decoders, servos, receivers, speed controls, etc...

Plug N’ Play sound module for Digitrax DH165 series decoders - DH165A0, DH165K0, DH165K1A, DH165L0 and DH165Q1. Preloaded with selectable Steam and Diesel sound schemes. Factory 28mm round 32 ohm speaker. Smart Power Management-no more booster or...

DCC Decoder Wire for decoder, lighting & signal installation. Includes: 10 foot lengths of 9 different NMRA colors of 30AWG stranded wire.

Ideal size for insulating decoder wire solder joints. Heat shrink tubing insulates and protects wire connections quickly and easily. Shrinks to half the listed diameter when heated with a match, soldering iron or heat gun. 6 inch lengths.

Assembly and breakdown of trains in the railway yard is tough work, but this Bachmann 0-6-0 steam switcher is ready to get the job done. Assemble your consist, clear the yard and move your freight to its final destination with the Pacific...

Precision engineered metal Knuckle Spring for Kadee #58, #78, #119, 150-Series, #178 & #2100 Scale delayed action HO couplers. One dozen per package.

The Brightboy track cleaner is ideal for cleaning the metal rails on a model train or an HO scale slot car track. Also, works great for cleaning HO slot car pick up shoes. The Brightboy is made with natural rubber, selected reinforcing agents and first...

This is the basic turnout of the Bachmann HO scale E-Z Track system with a turnout radius matching the 18 inch radius curved E-Z Track. Features - compatible with all HO gauge locomotives & rolling stock, code 100 steel alloy rails with attached...

This is the basic turnout of the Bachmann HO scale E-Z Track system with a turnout radius matching the 18 inch radius curved E-Z Track. Features - compatible with all HO gauge locomotives & rolling stock, code 100 steel alloy rails with attached...

Replacement rail joiners for Bachmann E-Z Track. Includes: 36 - HO scale rail joiners. Note: Recommended for ages 14 and up.