HobbyStar 150mm Servo Extensions
- SKU:
- 277-65-150
- Condition:
- New
Frequently bought together:
Description
If you ever run into a situation where the servo plug doesn't quite reach the servo, then you need this HobbyStar 5 3/4 inch long servo extension. Pro Tip - Plug a servo extension into the receiver for those plugs that sometimes need to be unplugged from the receiver, such as the ESC plug for programming purposes. It will be much easier to unplug from the female end of the servo extension, even more so if your receiver is in a protective box.
Includes: 5 - 150mm servo extensions.
Related Products
Out of stock
HobbyStar LED Program Card
$12.95
This LED program card is pretty much a must have item to get the most out of your HobbyStar brushless ESC. All you have to do is plug the ESC receiver plug into the card, power up the ESC and start...
HobbyStar Infrared Thermometer
$15.99
This HobbyStar Infrared Thermometer is a must have item to keep track of the motor and ESC temperatures of your RC vehicle. Overheating of these electrical components can shorten their life or cause...
HobbyStar Glitch Buster
MSRP:
$5.99
$4.95
The HobbyStar Glitch Buster helps to prevent voltage fluctuations which can result in radio interference or a brownout. It's a good idea to use one of these on all of your RC vehicles, even more so...
HobbyStar 5mm to 3.2mm Pinion Adapter
$2.99
This HobbyStar Pinion Adapter allows you to mount a pinion gear with a 5.0mm bore onto a 3.2mm (1/8") motor shaft. It's good to have at least one of these pinion adapters on hand, even more so if you...
HobbyStar Deans Male T-Plug w/ Wire
$1.95
This HobbyStar Deans Male T-Plug is ready to use with 5 1/2 inches of 14AWG silicone wire already soldered to the connector.
Includes: 1 - male T-plug with soldered 14AWG silicone lead...
