RC Car Electronics

This Integy silicone wire harness is approximately 8 inches long and plugs into the receiver to power an electronic accessory that has a male JST connector such as a cooling fan, LED lights, etc. The male receiver plug has a small tab that will fit the...

These Redcat Racing RER11417 servo extensions are 3 7/8 inces long and are used to add some extra length to the servo or ESC lead wires. Pro Tip - Plug a servo extension into the receiver for those plugs that sometimes need to be unplugged from the...

This Redcat Racing BS701-008 motor heat sink is 1 9/16 inches wide and simply clips on the outside of a 36mm diameter or 550 size RC motor to help dissipate excess heat. If you notice that the motor temperature is 165 degrees Fahrenheit or above, then...

This HobbyStar 5 3/4 inch long servo Y harness is a great way to power another accessory (fan, lights, transponder, etc.) when all the ports on the receiver are being used. Just plug the male plug of this Y harness into a receiver port so you can now...

The HobbyStar Deans T-Plug connectors are the most popular style of connector that you can use on your RC vehicle. This value pack comes with five sets of male and female T-plug connectors along with enough shrink tubing to finish them off...

This Lipo Battery Voltage Tester And Low Voltage Buzzer Alarm is a simple, compact, 2-in-1 device that is perfect for your 1-8S batteries. Just plug in your battery's balance connector and you'll know the pack voltage (both total pack & individual...

The Hobbywing 60A RTR brushless sensorless ESC is a great option for those who want to either convert a 1/10 RC vehicle to brushless power or need a solid replacement 60A brushless ESC for a 1/10 RTR RC vehicle. You can make adjustments on this ESC by...

The iMAX B6AC is hands down the most popular charger on the market and now they have upgraded it to provide 80W and 6.0A of charging power! One look at the features and the price and you'll know why! It's an AC/DC charger meaning you can power it by...

This Integy servo wire harness is 6 3/4 inches long and is unique in that it has a male servo plug on each end. This is just the right harness to hook up the Redcat Racing HX-LED-003 M1 lighting kit to an empy channel on the receiver. Includes:  1...

This Integy silicone wire harness is 4 inches long and plugs into the receiver to power an electronic accessory that has a male JST connector such as a cooling fan, LED lights, etc. The male receiver plug has a small tab that will fit the FlySky, Redcat...

This HobbyStar clear double sided tape is 1 mil thick and is perfect for securing a receiver or an ESC to your RC vehicle. The adhesive on the tape will keep your device securely fastened where you want it, yet the tape remains easy to remove and leaves...

This high-quality HobbyStar heat-shrink tubing variety pack is great to have on hand to cover all your wiring needs! It includes 3 pieces each of red and black 2mm, 4mm, 5mm and 6mm diameter tubing with each piece measuring 6 inches long...

The HobbyStar Glitch Buster helps to prevent voltage fluctuations which can result in radio interference or a brownout. It's a good idea to use one of these on all of your RC vehicles, even more so for those that are using upgraded servos that draw 2+...

This Female T Plug to 4.0 Banana Plug Adapter is used to connect a battery with a Banana 4.0 plug to an ESC or charger that has a Male T-Plug (DEANS). Includes: 1 - adapter.

This HobbyStar XT60 connector plugs in-between the main battery and the ESC to power an electronic accessory that has a male JST connector such as a cooling fan, LED lights, etc. The adapter features a male/female XT60 pass through connector with a JST...

This HobbyStar XT90 connector value pack comes with five pairs of male and female XT90 connectors. These 90 Amp high-current plugs are generally recommended for 4S to 6S LiPo batteries. Includes:  5 - male XT90 connectors and 5 - female XT90...

The Hexfly PRO-X2 AC/DC balance charger features two individual 80-Watt charging circuits allowing you to charge 2 batteries simultaneously, regardless of battery chemistry or cell count. The PRO-X2 can do it all, including balance charge Lithium...

The CellMeter 8 is a clever device that can show you the condition of your battery packs and also functions as a servo tester. It's capable of checking LiPo, LiFe & Li-ion RC battery packs by connectiong it to the balance plug or NiMH & NiCd...

The smoothest flowing solder for pinpoint accuracy with smaller electronics. Perfectly sized for soldering small parts like sections of track, small feeder wires and other smaller solder points found on today's electronics. Melts consistently and has a...

The HobbyStar 550 4-pole brushless motor is a perfect high-torque, high-performance powerplant that is ideal for 4x4 1/10 RC trucks. This motor has a lot to offer including: comes in a standard 550 size, 4 poles for lots of torque, plug and play with...