RC Radios & Servos

The Hexfly HX-3225 25KG high torque standard waterproof digital servo is the perfect upgrade for replacing the stock servo that comes in pretty much any 1/10 and 1/8 RTR RC vehicle, such as the Redcat Racing Blackout XTE or Everest Gen7. It will out...

The HobbyStar Glitch Buster helps to prevent voltage fluctuations which can result in radio interference or a brownout. It's a good idea to use one of these on all of your RC vehicles, even more so for those that are using upgraded servos that draw 2+...

This Redcat Rading RCR-2CE 2.4GHz radio is not only comfortable to use but it also offers all the important functions for controlling an RC vehicle or boat. This transmitter is compatible with the FlySky FS-GR3E and the Redcat Racing R-3E 2.4Ghz 3...

This HobbyStar clear double sided tape is 1 mil thick and is perfect for securing a receiver or an ESC to your RC vehicle. The adhesive on the tape will keep your device securely fastened where you want it, yet the tape remains easy to remove and leaves...

If you need something stronger than your standard plastic servo horn, upgrade to this Integy 25T Billet machined servo horn. Servo horn is a precise fit to the servo spline by tightening the included two small screws which eliminates any play. Compatible...

The CellMeter 8 is a clever device that can show you the condition of your battery packs and also functions as a servo tester. It's capable of checking LiPo, LiFe & Li-ion RC battery packs by connectiong it to the balance plug or NiMH & NiCd...

This FlySky FS-GR3E 2.4GHz 2 channel receiver is an inexpensive way to add another RC vehicle to your Redcat Racing RCR-2CE transmitter. This receiver is compatible with most Redcat Racing RTR RC vehicles such as the Blackout, CAMO, Dukono, Gen7, Kaiju,...

These Redcat Racing RER11417 servo extensions are 3 7/8 inces long and are used to add some extra length to the servo or ESC lead wires. Pro Tip - Plug a servo extension into the receiver for those plugs that sometimes need to be unplugged from the...

This R-3E 2.4GHz 2 channel receiver is an inexpensive way to add another RC vehicle to your Redcat Racing RCR-2CE transmitter. This receiver is the same one that comes in the Redcat Racing RTR RC vehicles such as the Blackout, CAMO, Dukono, Gen7, Kaiju,...

This HobbyStar 5 3/4 inch long servo Y harness is a great way to power another accessory (fan, lights, transponder, etc.) when all the ports on the receiver are being used. Just plug the male plug of this Y harness into a receiver port so you can now...

If you ever run into a situation where the servo plug doesn't quite reach the servo, then you need this HobbyStar 5 3/4 inch long servo extension. Pro Tip - Plug a servo extension into the receiver for those plugs that sometimes need to be unplugged from...

Highest RC servos are designed and manufactured to provide unmatched performance and durability to racers at all levels. Featuring the finest quality components available on today’s market, Highest RC servos will amaze you with their quiet...

If you need something stronger than your standard plastic servo horn, upgrade to this Integy 25T Billet machined servo horn. Servo horn is a precise fit to the servo spline by tightening the included two small screws which eliminates any play. Compatible...

If you need something stronger than your standard plastic servo horn, upgrade to this Integy 24T Billet Machined Servo Horn. Servo horn is a precise fit to the servo spline by tightening the included two small screws which eliminates any play. Compatible...

The Hexfly HX-15CC 15KG Metal Gear Servo with Servo Saver is a direct replacement servo/servos saver for the Redcat Racing Blackout SC PRO and Blackout XTE PRO. The HX-15CC is also used to upgrade the servo on the brushed versions of the Blackout SC and...

The Hexfly HX-15S 15KG Metal Gear Servo is a direct replacement servo for Redcat Racing radio control vehicles and can also be used in most other hobby grade remote control vehicles. Metal gears, splash proof and a simple plug & play standard servo...

Du-Bro's double sided tape assortment comes in 3 different thicknesses: 1/32" (0.7mm), 1/16" (1.5mm), 1/8" (3mm). Each size is diecut into four 1" (25mm) x 3" (76mm) pieces. Works great for mounting decoders, servos, receivers, speed controls, etc...