RC Car Electronics

The Hexfly HX-3225 25KG high torque standard waterproof digital servo is the perfect upgrade for replacing the stock servo that comes in pretty much any 1/10 and 1/8 RTR RC vehicle, such as the Redcat Racing Blackout XTE or Everest Gen7. It will out...

The Hexfly HX-C6D Mini AC Balance Charger Discharger is the ultimate solution for charging and discharging a wide range of batteries including LiPo, LiFe, LiHv, Li-ion, NiMH, NiCd and Pb. Don't let the small size fool you! This HX-C6D Mini can do it...

This HobbyStar 2S 7.4V 5200mAh 30C hard case LiPo battery is recommended for radio control vehicles that use a 2S LiPo battery, such as the Redcat Racing Blackout PRO, Dukono PRO, Wendigo and the Traxxas Slash. It is also great for upgrading a brushed RC...

The Hexfly 7.2V 3800mAh NiMH Battery offers more run time than the stock NiMH battery that comes with the brushed Redcat RTR 1/10 RC vehicles. Includes Banana plug for direct plug and play with Redcat Racing radio control vehicles. Specifications:...

This R-3E 2.4GHz 2 channel receiver is an inexpensive way to add another RC vehicle to your Redcat Racing RCR-2CE transmitter. This receiver is the same one that comes in the Redcat Racing RTR RC vehicles such as the Blackout, CAMO, Dukono, Gen7, Kaiju,...

When it comes to a brushed motor, just remember the lower the number of turns the faster the motor. The Redcat Racing 16T RC550 Brushed Motor is a great value and comes standard on the brushed Blackout 1/10 RC vehicles. This motor would also be a great...

This Redcat Rading RCR-2CE 2.4GHz radio is not only comfortable to use but it also offers all the important functions for controlling an RC vehicle or boat. This transmitter is compatible with the FlySky FS-GR3E and the Redcat Racing R-3E 2.4Ghz 3...

If you need a simple way to balance charge a 2S or 3S LiPo battery for a super low price then look no further! The Hexfly A-3 is an AC charger which means you can simply plug it into a wall, and it will balance charge either a 2S or 3S LiPo battery...

Pressing the SET button and counting the LED flashes will get you by but it's so much easier to program your Hexfly or Hobby Wing with this program card. All you have to do is plug the ESC receiver plug into the card, power up the ESC and start changing...

A LiPo Guard Battery Bag is recommended to safely charge, discharge, and store a LiPo battery pack. It's easy to use...just insert the LiPo battery and close the Velcro flap. This battery bag measures 9 x 7 inches, which is a good size for a 2S thru 4S...

This LED program card is pretty much a must have item to get the most out of your HobbyStar brushless ESC. All you have to do is plug the ESC receiver plug into the card, power up the ESC and start changing your ESC settings. That's it! Includes: ...

The HobbyStar 3650 4-pole brushless motor is ideal for upgrading a brushed 2wd and 4x4 1/10 RC vehicle to brushless or use as an inexpensive replacement for that worn out 3650 or 540 brushless motor. This motor has a lot to offer including: comes in a...

The Hexfly HX-N802 AC Battery Charger is an easy to use charger with attached Tamiya male plug (not pictured) for 4-8V NiMh or NiCd batteries. This Hexfly HX-N802 charger has over 4 times the power of the basic Redcat NiMh charger which is included with...

The Hexfly HX-15S 15KG Metal Gear Servo is a direct replacement servo for Redcat Racing radio control vehicles and can also be used in most other hobby grade remote control vehicles. Metal gears, splash proof and a simple plug & play standard servo...

This Integy high speed cooling fan moves a lot more air at 6 volts than the stock fan that comes with many of the Integy motor heatsink cooling fan combos. It's standard 30x30mm size makes it a great upgrade for that wimpy fan that is barely moving any...

This HobbyStar 12 AWG (American Wire Gauge) silicone wire is made to take the high amps of today's brushless motors and high C rated LiPo batteries. It's sold by the foot (you will receive one foot per quantity ordered in one continuous length of wire)...

This FlySky FS-GR3E 2.4GHz 2 channel receiver is an inexpensive way to add another RC vehicle to your Redcat Racing RCR-2CE transmitter. This receiver is compatible with most Redcat Racing RTR RC vehicles such as the Blackout, CAMO, Dukono, Gen7, Kaiju,...

This HobbyStar Deans T-Plug connector plugs in-between the main battery and the ESC to power an electronic accessory that has a male JST connector such as a cooling fan, LED lights, etc. The adapter features a male/female Deans pass through connector...

The HobbyStar 60A RTR brushless sensorless ESC is a great option for those who want to either convert a 1/10 RC vehicle to brushless power or need a solid replacement 60A brushless ESC for a 1/10 RTR RC vehicle. This ESC is super easy to set up and you...

This HobbyStar Infrared Thermometer is a must have item to keep track of the motor and ESC temperatures of your RC vehicle. Overheating of these electrical components can shorten their life or cause a failure. The ultra-compact design lets you slip it in...